0.1calss 6.5mm Hole PCB Mounting Current Transformer

• Application: Electronic, Instrument, Position Sensor, Audio, Lighting
• Type: Current Transformer
• Phase: Single
• Operation Condition: Indoor
• Usage: Protection, Measurement
• Winding Form: Single Layer & Tightly Wound Type
• Model NO.: ZMCT116A
• Insulating Medium: Epoxy Resin
• Installation: PCB Mounting
• Magnetic Circuit Structure: Combined Type
• Voltage Transformation Principle: Capacitive Type
• N.W: 15g
• Turns Ratio: 2500:1
• Transport Package: Cartons
• Specification: ISO9001, ISO14001, CE, ROHS, SGS
• Trademark: zeming
• Origin: Nanjing, Jiangsu
• HS Code: 8504311000
• Production Capacity: 200.000PCS/Month

Product Description

ZMCT116A  Current Transformer

Features and applications: Small size,high accuracy,good consistency,for current and power measurement
 Key words: current transformer
Structural parameters:



              Remarks:  Primary input: straight- through type( make the measured circuit be through the hole)
                     Secndary output:1,2pin    empty pins: 3,4pin 
             Front view                                  Bottom view
 
The main technical parameters:

Model	ZMCT116A
input current	0~70A(sampling resistor 100Ω)
Rated output current	2mA at input 5A
turns ratio	2500:1
phase angle error	≤20'(input 1A,sampling resistor 100Ω)
current range	0~70A(sampling resistor 100Ω)
linearity	0.1%(5%dot~120%dot)
Permissible error	-0.2%≤f≤+0.2%(input 1A,sampling resistor 100Ω)
isolation voltage	4500V
application	current and power measurement
Encapsulation	Epoxy
installation	PCB mounting(Pin Length>3mm)
operating temperature	-40ºC~+85ºC

Direction for use:
 

                                   Figure I                                                   FigureII
1. ZMCT116A used for measurement. Typical usage is shown in Figure 1 and Figure 2. R is a sampling resistor.
2. Empty pin can not be grounded.